The Can Bus is Live!

Because the wings are stored in a hanger about 80 miles from here I can’t test the roll servo. This servo is part of the Can Bus which interconnects many of the avionics components including the MFD, PFD, autopilot, radios etc. I was able to test most of the other components by putting a 120 ohm terminator pig tail on to the can bus at the right wing root. The result is that most of the red Xs are gone.

Still a bit of work to do on the yaw servo, the fuel pump, and the firewall forward. Progress.

Leave a Reply

Close Bitnami banner
Bitnami